YTO
YTO Static Tandem Roller 2Y8x10D
The driving wheel is of frame model, with low center of gravity and good stability; The front part of the system is narrow, with good view of steering; Dual chairs, dual steering wheels and good side compacting effect; The system is provided with a water spraying device, and the front and the rear wheels are evenly sprayed. Hydraulic controlled power steering. Hydraulic break system.
Diesel Engine
Model 495AY
Rated power/rotational speed 36.75 kW @ 2000 r/min
Weight
Operating weight (with driver's cab) 8000－10000 kg
Front wheel linear load 230－310 N/cm
Rear wheel linear load 410－500 N/cm
Transmission system
1st Gear(F/R) 2 km/h
2nd Gear(F/R) 4 km/h
3rd gear 7.0 km/h
Gradeability 20%
Machine parameters
Inside turning radius 5230 mm
Outside turning radius 6500 mm
Steering angle 36°
Ground clearance 320 mm
Axle base 3150 mm
Machine dimensions
Length×Width×Height 4500×1580×2660 mm
Front wheel width×Front wheel diameter 1270×φ1020 mm
Rear wheel width×Rear wheel diameter 1270×φ1320 mm
Refilling capacities
Fuel tank capacity 100 L
Hydraulic oil tank capacity 50 L
YTO Static Tandem Roller
TANDEM ROLLER is mostly suitable for flattening and compacting surfaces of the roads including hornblende, broken stone, asphalt and concrete ones. It can be also used for compaction based of roads. Articulated connection and flexible steering. It adopted the hydraulic braking, safe and dependable. The nose of the roller is narrow with an excellent turning sight.
Articulated connection and flexible steering. It adopted the hydraulic braking safe and dependable.
There is simple chair in the cab and single steering wheel. It has good capacity of stitching hems.
The nose of the roller is narrow with an excellent turning sight.
A sprinkling set is equipped for evenly sprinkling water on the surfaces of both front and rear drums.
Operating mass 8000/10000Kg
Front linear load 242/303N/cm
Rear linear load 343/429N/cm
1st gear 2.62
2nd gear 5.18
3rd gear 10.3
Gradeability 20%
Turning radius(inside/outside) 5050/6450mm
Overall Dimension(L*W*H) 4380*1710*2560mm
Wheelbase 3150mm
Ground clearance 320mm
Diesel power/model 42KW/4100A
